Humbaur HS 10 50 20 BS - Έτος κατασκευής 2023

Humbaur HS 10 50 20 BS 23.681 €

Dealer number ATC3077193

Τιμή συμπ. ΦΠΑ 19 % 23.681 €

Τιμή χωρίς ΦΠΑ 19.900 €

Ημιτελές προϊόν Humbaur

Μοντέλο HS 10 50 20 BS

Έτος κατασκευής 2023

Περισσότερες πληροφορίες

Είδος οχήματος: Μεταχειρισμένο μηχάνημα

Ημιτελές προϊόν: Humbaur

Μοντέλο: HS 10 50 20 BS

Έτος κατασκευής: 2023

Βάρος (to.): 2.45

επιτ. συνολικό βάρος (to.): 10.5

Λεπτομέρειες

Humbaur tandem low loader
with standard equipment
Technical data:
Interior dimensions: approx. 5,000 mm x 2,010 mm x 250
mm
Overall dimensions: approx. 7,160 mm x 2,550 mm x
3,200 mm
Permissible total weight: 10,500 kg
Payload: approx. 8,050 kg
Wheelbase: 990 mm
Tires: 235/75 R 17.5 inch
Loading height: approx. 700 mm
Drawbar length: approx. 1800 mm
Coupling height: approx. 700-950 mm
Drive-on angle: approx. 15°
Screed length: approx. 2600 mm
Plank width: approx. 540 mm
2 pairs of lashing rings, 3000 kg per lashing point
Lashing rings recessed in the bridge floor
6 pairs of lashing rings, 1000 kg per lashing point
Lashing rings in the outer frame
Standard equipment:
Axles
Axles from renowned manufacturers;
Suspension:
Maintenance-free parabolic suspension
with load compensation;
Tires:
Tires of the manufacturer's choice on
steel rims;
Brake system:
ABS brake system according to ECE directive,
with ALB function;
ABS plug-in connection ISO 7638;
Spindle parking brake;
2 interchangeable clutch heads
red/yellow ISO 1728;
Towing device:
Drawbar with DIN screw drawbar eye Ø 40 mm,
galvanized,
infinitely adjustable via crank;
Electrical system:
24 volt lighting system with
multi-chamber rear lights
and LED side marker lights;
15-pin connector plug
for lighting;
Frame:
Solid, welded chassis frame
chassis frame,
hot-dip galvanized;
Low design, loading area straight
between the wheels;
Fixed, hot-dip galvanized front
and side walls;
Corner stanchions can be plugged in at the rear;
Floor:
Floor covering made of 40 mm softwood flooring;
Support:
Reinforced 12 t geared support winch
with load and fast gear;
2 x outriggers on the frame, foldable
and telescopic;
Ramp decking made of galvanized grating;
Ramp lifter 1 gas pressure spring per ramp;
Ramp safety device on rear stanchion;
Equipment
Galvanized steel mudguards
with anti-spray mats;
Side collision protection rigidly attached,
from the start of the bridge to the 1st axle;
Contour markings at the sides and rear;
2 wheel chocks with holder;
Space for two-line license plate;
Automatic translation from German without guarantee.
Show original description