Νέο μηχάνημα Δοχεία υδαρούς κοπριάς: Joskin TETRALINER 26000 RL

Joskin TETRALINER 26000 RL 81.991 €

Dealer number 300152338

Τιμή συμπ. ΦΠΑ 19 % 81.991 €

Τιμή χωρίς ΦΠΑ 68.900 €

Ημιτελές προϊόν Joskin

Μοντέλο TETRALINER 26000 RL

Έτος κατασκευής 2024

Περισσότερες πληροφορίες

Είδος οχήματος: Νέο μηχάνημα

Ημιτελές προϊόν: Joskin

Μοντέλο: TETRALINER 26000 RL

Έτος κατασκευής: 2024

Λεπτομέρειες

TETRALINER 26000 RL
TETRALINER slurry tanker 26000 RL with
vacuum pump
- European approval 30 T permissible total weight
total weight (+ 3 / 4 T drawbar eye)
at 40 km/h for three-axle vehicles (Cat. R)
- Wheels 560/60R22.5 (MITAS) Agriterra 02
165 D (Ø 1,247 x 567 mm, 7,000 kg per wheel at
wheel at 40 km/h and 5 bar) instead of
400R22.5
- Load-dependent air brakes for
Vehicle with hydraulic suspension
of the axles (air brakes
required)
- 2 rear work lights LED +
Rotating beacon (with control unit
in the tractor cab)
- Marker lights and side
LED lights
- Pump type PNR 155 JUROP (15,200 l/min
at atmospheric pressure - 13,217
l/min at 60 % of empty air) - Direct connection
Direct connection 1,000 rpm -
Automatic lubrication,
Siphon separator 60 l, rubber hose Ø
100 mm, JOSKIN pressure relief valve Ø 150
mm and cooling by air injection
instead of MEC 8000
- ECOPUMP: Silencer with
large-volume oil separator and
increased air supply - noise reduction included
noise included
- Single-sided wide-angle PTO shaft
(Walterscheid)
- Elongated sight glass (300 x 80 mm)
instead of Ø 2" sight glass (when ordering
(when ordering, please specify position and
sketch when ordering) - per unit
- Intake slide Ø 6" (150 mm) with
guide rail, type Perrot
- Turbo filler Ø 8" (200 mm) large
flow rate (hydraulics: 50 l/min
at 180 bar) with pressure gauge Ø 60 mm
(suction gate valve required)
- Preparation for FrontJUMBO without
Installation Ø 200 mm
- Manually operated 6-way slide valve for the
combination of 2 double-acting functions
- Delivery of the slurry tank without
rear slider and without distributor
- Pneumatic brakes with spring accumulator
Brake cylinders instead of standard
parking brakes (compressed air brakes
brakes required - mounting only on
rigid axle)
- Connecting hose left / right with
2 dummy cylinders Ø 8" (200 mm) on the front axle
Pre-fitting for lateral suction
- Slider to be taken additionally
- Hopper Ø 8" (200 mm) rear left
without installation (with industrial
double-acting slide valve and dip tube)
- Wheel chocks (1 pair)
- Hydraulic slide valve on siphon separator
(strongly recommended with outlet funnel -
required if venting
in addition to the funnel)
- Slurry tanker X-TREM 1/32
Automatic translation from German without guarantee.
Show original description